Please enable the Pro Controller Wired Communication setting in the Switch console itself. You can do this by going to System Settings > Controller and Sensors > Pro Controller Wired Communication. Set the Pro Controller Wired Communication to On.
Step 2
Slide the Switch console into the controller and plug it into the USB-C port at the bottom.
Step 3
After you have done so, press the A button on the controller to connect it to the console.
1.Press the HOME Button to return to the console home page and select System Settings.
2.Select the heading Controllers and Sensors and then select Calibrate Control Sticks.
3.Follow the instructions as shown below to calibrate the joysticks.
4.Follow the onscreen prompts to redo the calibration process if the joystick is not working as expected. Otherwise, your joystick will now be fully calibrated.
There's a switch at the bottom left of device will allow you to charge it while it's connected. Switch it to the right to enable charging. Switch it to the left to disable charging. If that doesn't work, make sure your devices it all the down inside the holster. That switch may or may not toggle the vibration setting.
