Chapters 0:14 How do I use the NexiGo PJ10 Projector?
0:38 Connect the projector to Wi-Fi
0:52 Mirror your screen from Windows to the projector
01:26 Mirror your screen from an iOS device to the projector 01:50 Mirror your screen from an Android device to the projector 02:18 Screen cast your phone to the projector
02:35 Screen mirror your device using a wired connection (For iPhone/iPad only)
02:56 Switch off the projector
Firmware Upgrade Instructions :
IMPORTANT:
0: Unless you have issues with the camera, we don't recommend any firmware updates. If you are not sure about if updates are needed, please contact our customer support cs@nexigo.com.
1: DO NOT power off or try to use the projector during the updating.
Step 1
Navigate to Cast Settings from Home > Input Source> MultiScreen > Cast Settings.
Step 2
Move the on-screen cursor to WiFi Setting and press OK.
Select your wireless network from the list as shown below and input the password to connect your projector to the WiFi network.
Step 3
Move the on-screen cursor to Online Update and press OK.
A firmware upgrade confirmation window will pop up, click confirm to start the update.
Step 4
The projector starting to download the latest firmware.
After downloading the firmware, the projector starts updating automatically.
The projector will be reset after the software updates, all saved settings will be erased.
Note: Please make sure not to power off or try to use the projector during the updating. The projector will be reset after the software updates, all saved settings will be erased.
A: Yes, the native resolution of PJ10 is FHD/1080P, which means it can truly display FHD.
A: Yes, the PJ10 projector comes with a 3.5mm audio port for headphones.
A: The projected color accuracy will suffer in daylight, so we recommend that you should use the projector in low-light environments for better viewing experience.
A: Yes, NexiGo PJ10 has ±15° manual keystone correction.
A: Unfortunately, this projector does not support auto focus, you have to manually adjust the focus.
A: No, due to copyright protection, content from Hulu, Netflix, Amazon Prime Video and similar apps are NOT allowed to be mirrored. However, you can plug in a TV stick through the HDMI port and play them from the TV stick.
